LEAD STRENGTH

1) Bend strength

Do not bend the lead more than twice. (Fig.9)

2) Tensile strength (@Room Temperature)

If the force is 1kg or less, there will be no problem. (Fig.10)

HANDLING PRECAUTIONS

Although rigid against vibration, the LEDs may damaged or scratched if dropped. So take care

when handling.

CHEMICAL RESISTANCE

1) Avoid exposure to chemicals as it may attack the LED surface and cause discoloration.

2) When washing is required, refer to the following table for the proper chemical to be sued.

(Immersion time: within 3 minutes at room temperature.)

SOLVENT

ADAPTABILITY

Freon TE

Chlorothene

Isopropyl Alcohol

Thinner

Acetone

Trichloroethylene

--Usable

--Do not use.

Page : 8

Fig.9

Fig.10

NOTE: Influences of ultrasonic cleaning of the LED

resin body differ depending on such factors

as the oscillator output, size of the PC board

and the way in which the LED is mounted.

Therefore, ultrasonic cleaning should only be

performed after confirming there is no problem by

conducting a test under practical.

LED

LAMP APPLICATION