CRS14

2009-04-20

3

Marking

Abbreviation Code

Part No.

SD

CRS14

Standard Soldering Pad

Handling Precaution

Schottky barrier diodes have reverse current characteristics compared to other diodes.

There is a possibility SBD may cause thermal runaway when it is used under high temperature or high voltage.

Please take forward and reverse loss into consideration during design.

The absolute maximum ratings of a semiconductor device are a set of ratings that must not be exceeded,even for a

moment. Do not exceed any of these ratings. The following are the general derating methods that we recommend

when you design a circuit with a device.

this temperature coefficient into account designing a device at low temperature.

This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation,

which seldom occurs during the lifespan of the device.

Derate this rating when using a device in order to ensure high reliability. We recommend that the

Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When

using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value.

2.8

1.2

1.2

Unit: mm

Part No.(or abbreviation code)

Cathode mark and Lot code

Anode

Cathode

SD