CDCE62002 datasheet(30/49 Pages) TI

Part #	CDCE62002

Description	Four Output Clock Generator/Jitter Cleaner With Integrated Dual VCOs

Download	49 Pages

Scroll/Zoom	100%

Manufacturer	TI [Texas Instruments]

Direct Link	http://www.ti.com

Logo

30 / 49 page

Auxiliary Input Port

External Feedback Mode

FB

PFD/

CP

Feedback

Divider

Divby 1

REF_IN

CDCE62002

SCAS882A – JUNE 2009 – REVISED JULY 2009.............................................................................................................................................................. www.ti.com

The auxiliary input on the CDCE62002 is designed to connect to an AT-Cut Crystal with a total load capacitance

of 8 pF to 18pF. One side of the crystal connects to Ground while the other side connects to the Auxiliary input of

the device. The circuit accepts crystals from 2 to 42 MHz.

Since the Auxiliary input operates between 0 and 2 Volts with a crystal, it can accept single-ended signals (e.g.,

LVCMOS). Electrically, it is equivalent to an LVCMOS input buffer with 8 pF of input capacitance.

Figure 24. CDCE62002 Auxiliary Input Port

The auxiliary input on the CDCE62002 is to serve as an external feedback port if Bit (10) in Register 0 is set to

“1” and input smart Mux setting is set to Reference input. In addition, The Reference Divider and the input divider

have to be set to divide by 1. This feature is implemented to allow direct access to the PFD of the PLL. The

delay from Reference input to PFD and from Auxiliary Reference to PFD is not matched. However, in close loop

system where the device output is fed to close the loop the delay difference between the Reference and External

feedback path will cancel out.

Figure 25. CDCE62002 in External Feedback Mode

30

Submit Documentation Feedback

Product Folder Link(s): CDCE62002

Similar Part No. - CDCE62002

Manufacturer	Part #	Datasheet	Description
Texas Instruments	CDCE62005	2Mb / 76P	[Old version datasheet] Five/Ten Output Clock Generator/Jitter Cleaner With Integrated Dual VCOs
	CDCE62005	2Mb / 80P	[Old version datasheet] Five/Ten Output Clock Generator/Jitter Cleaner With Integrated Dual VCOs
	CDCE62005	2Mb / 85P	[Old version datasheet] 3:5 Clock Generator
	CDCE62005RGZR	2Mb / 76P	[Old version datasheet] Five/Ten Output Clock Generator/Jitter Cleaner With Integrated Dual VCOs
	CDCE62005RGZR	2Mb / 80P	[Old version datasheet] Five/Ten Output Clock Generator/Jitter Cleaner With Integrated Dual VCOs

More results

Similar Description - CDCE62002

Manufacturer	Part #	Datasheet	Description
Texas Instruments	CDCE62005	2Mb / 80P	[Old version datasheet] Five/Ten Output Clock Generator/Jitter Cleaner With Integrated Dual VCOs
	CDCE62005	2Mb / 76P	[Old version datasheet] Five/Ten Output Clock Generator/Jitter Cleaner With Integrated Dual VCOs
	CDCM61004_101	714Kb / 35P	[Old version datasheet] Four Output, Integrated VCO, Low-Jitter Clock Generator
	CDCM61004	867Kb / 35P	[Old version datasheet] Four Output, Integrated VCO, Low-Jitter Clock Generator
	CDCM61004	790Kb / 34P	[Old version datasheet] Four Output, Integrated VCO, Low-jitter Clock Generator
	CDCM61004	1Mb / 39P	[Old version datasheet] Four Output, Integrated VCO, Low-Jitter Clock Generator
Analog Devices	AD9523	1,011Kb / 60P	Jitter Cleaner and Clock Generator
Analog Devices	AD9524	973Kb / 56P	Jitter Cleaner and Clock Generator
Texas Instruments	CDCM6208V1F	2Mb / 87P	[Old version datasheet] 2:8 Clock Generator, Jitter Cleaner with Fractional Dividers
Texas Instruments	CDCM6208	2Mb / 89P	[Old version datasheet] 2:8 Clock Generator, Jitter Cleaner With Fractional Dividers

More results

CDCE62002 Datasheet(PDF) 30 Page - Texas Instruments

CDCE62002 Datasheet(HTML) 30 Page - Texas Instruments

Similar Part No. - CDCE62002

Similar Description - CDCE62002

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Datasheet Download

Link URL