1

Features

4

1. Multiple Channels

Four channels (7075) or two channels (7075-01) are

provided in a compact, lightweight unit. Multi-channel

evaluations such as 3-phase motor simulations can be

produced with a single device.

2. Channel-Independent Operation

Waveform selection and various settings, including

custom waveform sampling clock frequency and sweep

control can be set and activated independently for each

channel.

3. Simple Operation

Simple, direct operation is provided by a touch panel

user interface.

4. Easy to Use with Actual Waveforms

Waveforms measured with a MEMORY HiCORDER

can be downloaded to 3.5" floppy disk or GP-IB.

Amplitude and time axes data are downloaded together,

so the actual waveforms can be reconstructed.

Waveforms and settings can also be saved. The floppy

drive is compatible with 1.44-MB MS-DOS format.

5. Synchronized Drive Capability

With one unit configured as the master, up to four units

(16 channels) can be driven synchronously.

6. Timing Simulation by External Trigger

Each channel can be independently triggered by terminals

on the rear, so various timings can be simulated.

7. Bundled Waveform Creation Software

The bundled 7990 WAVEFORM CREATION

environment on a PC. Capabilities range from custom

waveform design to processing actual waveform

simulations. Created waveforms are transferred to the

7075 by floppy disk or RS-232C interface.

8. External Control

External control can be provided through the GP-IB

interface. Waveforms from a MEMORY HiCORDER

can also be downloaded by GP-IB.

Even for Complex Signals, Evaluation is

Made Easy

2

Basic Features

3

1

•

8 basic waveform types

•

Sine and square waves from

10 mHz to 10 MHz

•

Triangle, ramp and pulse

waves from 10 mHz to 200 kHz

•

Long-duration memory

of 128,000 words/ch

•

16-bit voltage axis

resolution

±10V

Output

7075 Basic Features

5

6

7

8

q Large 128,000-Word/Channel Memory

The large arbitrary waveform memory consists of 128,000

words per channel. Even at the fastest 10 MHz clock,

12.8 ms custom waveforms can be output.

q 16-Bit Voltage Axis Resolution,

Up to 10 MHz Clock

The 16-bit resolution on the voltage axis and 10 MHz

maximum clock provide faithful reproduction of actual

waveforms and high-quality custom waveform output

capability.

Three output ranges (0.1, 1 and 10V peak) are provided.

q Sweep Sequence Functions Installed

Frequency, amplitude and offset can be swept

simultaneously, and combinations of sweep conditions

in up to 128 steps allow easy generation of complex

signals for evaluation.

q Eight Basic Waveforms Built In

Eight basic waveforms: sine, square, pulse, triangle,

ramp up, ramp down, noise and DC are selectable in the

function generator mode. Eight waveforms can also be

stored in the arbitrary waveform mode, allowing quick

handling of all types of waveforms.

Function

Generator Mode

Arbitrary

Waveform Mode