| Electronic Components Datasheet Search |
|
M30620FCAFP Datasheet(PDF) 459 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M30620FCAFP Datasheet(HTML) 459 Page - Renesas Technology Corp |
|
459 / 615 page ![]() D-A Converter Mitsubishi microcomputers M16C / 62A Group SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER 2-142 2.8 D-A Converter Usage Figure 2.8.2. D-A converter-related registers Figure 2.8.1. Memory map of D-A converter-related registers 03D816 03D916 03DA16 03DB16 03DC16 D-A register 0 (DA0) D-A register 1 (DA1) D-A control register (DACON) D-A control register Symbol Address When reset DACON 03DC16 0016 b7 b6 b5 b4 b3 b2 b1 b0 D-A0 output enable bit DA0E Bit symbol Bit name Function R W 0 : Output disabled 1 : Output enabled D-A1 output enable bit 0 : Output disabled 1 : Output enabled DA1E Nothing is assigned. In an attempt to write to these bits, write “0”. The value, if read, turns out to be “0” D-A register Symbol Address When reset DAi (i = 0,1) 03D816, 03DA16 Indeterminate W R b7 b0 Function R W Output value of D-A conversion 2.8.1 Overview of the D-A converter usage The D-A converter used in the M16C/62A group is based on the 8-bit R-2R technique. (1) Output voltage The D-A converter outputs voltage within a range from 0 V to VREF. The output voltage is determined by VREF/(256) X the D-A register contents. The D-A converter is not effected by the Vref connection bit of the A-D converter. (2) Conversion time tsu = 3 µs (3) Output from the D-A converter and the direction register To use the D-A converter, do not set the direction register of the relevant port to output. (4) Pins related to the D-A converter • DA0 pin, DA1 pin Output pins of the D-A converter • AVcc pin The power source pin of the analog section • VREF pin Input pin of the reference voltage • AVss pin The GND pin of the analog section (5) Registers related to the D-A converter Figure 2.8.1 shows the memory map of D-A converter-related registers, and Figure 2.8.2 shows D-A converter-related registers. (6) Note D-A output pins shared with P93 and P94. The two pins are input ports and floating at the reset. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |