M58WR016QT datasheet(21/110 Pages) NUMONYX

Part #	M58WR016QT

Description	16 Mbit and 32 Mbit (x16, Multiple Bank, Burst) 1.8V supply Flash memories

Download	110 Pages

Scroll/Zoom	100%

Manufacturer	NUMONYX [Numonyx B.V]

Direct Link	http://www.numonyx.com

Logo

21 / 110 page

M58WR016QT, M58WR016QB, M58WR032QT, M58WR032QB Command interface - standard com-

21/110

5.4

Read CFI Query command

The Read CFI Query command is used to read data from the Common Flash Interface

(CFI). The Read CFI Query Command consists of one Bus Write cycle, to an address within

one of the banks. Once the command is issued subsequent Bus Read operations in the

same bank read from the Common Flash Interface.

If a Read CFI Query command is issued in a bank that is executing a Program or Erase

operation the bank will go into Read CFI Query mode, subsequent Bus Read cycles will

output the CFI data and the Program/Erase controller will continue to Program or Erase in

the background. This mode supports asynchronous or single synchronous reads only, it

does not support page mode or synchronous burst reads.

The status of the other banks is not affected by the command (see Table 12). After issuing a

Read CFI Query command, a Read Array command should be issued to the addressed

bank to return the bank to Read Array mode.

See Appendix B, Tables 33, 34, 35, 36, 37, 38, 39, 40, 41 and 42 for details on the

information contained in the Common Flash Interface memory area.

5.5

Clear Status Register command

The Clear Status Register command can be used to reset (set to ‘0’) error bits SR1, SR3,

SR4 and SR5 in the Status Register. One bus write cycle is required to issue the Clear

Status Register command. The Clear Status Register command does not change the Read

mode of the bank.

The error bits in the Status Register do not automatically return to ‘0’ when a new command

is issued. The error bits in the Status Register should be cleared before attempting a new

Program or Erase command.

Similar Part No. - M58WR016QT

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	M58WR016KL	80Kb / 10P	16- or 32-Mbit (횞16, Mux I/O, Multiple Bank, Burst) 1.8 V supply Flash memories
Numonyx B.V	M58WR016KL	2Mb / 123P	16-, 32- and 64-Mbit (x 16, Mux I/O, Multiple Bank, Burst) 1.8 V supply Flash memories
STMicroelectronics	M58WR016KL60ZA6E	80Kb / 10P	16- or 32-Mbit (횞16, Mux I/O, Multiple Bank, Burst) 1.8 V supply Flash memories
Numonyx B.V	M58WR016KL60ZA6E	2Mb / 123P	16-, 32- and 64-Mbit (x 16, Mux I/O, Multiple Bank, Burst) 1.8 V supply Flash memories
STMicroelectronics	M58WR016KL60ZA6U	80Kb / 10P	16- or 32-Mbit (횞16, Mux I/O, Multiple Bank, Burst) 1.8 V supply Flash memories

Manufacturer	Part #	Datasheet	Description
Numonyx B.V	M58WR064HT	1Mb / 111P	64 Mbit (4Mb x16, Multiple Bank, Burst) 1.8V supply Flash memories
Numonyx B.V	M58WR064HU	2Mb / 114P	64 Mbit (4Mb x16, Mux I/O, Multiple Bank, Burst) 1.8V supply Flash memories
STMicroelectronics	M58WR064FT	573Kb / 87P	64 Mbit (4Mb x16, Multiple Bank, Burst) 1.8V Supply Flash Memory
	M58WR032ET	558Kb / 81P	32 Mbit (2Mb x 16, Multiple Bank, Burst) 1.8V Supply Flash Memory
	M58WR032FT	1Mb / 86P	32 Mbit (2Mb x 16, Multiple Bank, Burst) 1.8V Supply Flash Memory
	M58PR256J	842Kb / 114P	256 Mbit or 512 Mbit (x16, Multiple Bank, Multilevel, Burst) 1.8 V supply Flash memories
	M36W0R5020T0	184Kb / 26P	32 Mbit (2Mb x16, Multiple Bank, Burst) Flash Memory and 4 Mbit SRAM, 1.8V Supply Multi-Chip Package
	M30L0R7000B0	1Mb / 83P	128 Mbit (8Mb x16, Multiple Bank, Multi-Level, Burst), 1.8V Supply Flash Memory
	M58LR128FT	537Kb / 82P	128 Mbit (8Mb x16, Multiple Bank, Multi-Level, Burst) 1.8V Supply Flash Memory
	M58LR128GT	1Mb / 84P	128 Mbit (8Mb x16, Multiple Bank, Multi-Level, Burst) 1.8V Supply Flash Memory