Electronic Components Datasheet Search |
|
M29DW641F Datasheet(PDF) 23 Page - Numonyx B.V |
|
M29DW641F Datasheet(HTML) 23 Page - Numonyx B.V |
23 / 80 page M29DW641F Software Protection 23/80 5.2.2 Non-volatile Protection The Non-Volatile Protection is more advanced in the Password Protection mode. In this mode, the Lock-Down bit is non-volatile and cannot be cleared through a hardware reset or a power-down/power-up sequence. The Lock-Down bit is cleared by issuing the Password Protection Unlock command along with the correct password. Once the correct Password has been provided, the Lock-Down bit is cleared and the Non-Volatile Modify Protection bits can be set or reset using the appropriate commands (the Set Non-Volatile Modify Protection bit command or the Clear Non-Volatile Modify Protection bits command, respectively). If the Password provided is not correct, the Lock-Down bit remains locked and the state of the Non- Volatile Modify Protection bits cannot be modified. The Password is a 64-bit code located in the memory space. It must be programmed by the user prior to selecting the Password Protection mode. The Password is programmed by issuing a Password Program command and checked by issuing a Password Verify command. The Password should be unique for each part. Once the device is in Password Protection mode, the Password can no longer be read or retrieved. Moreover, all commands to the address where the password is stored, are disabled. Refer to Table 7 and Figure 6: Software Protection scheme for details on the block protection scheme. Table 7. Block Protection status Volatile Lock bit Non-volatile Modify Protection bit Lock-Down bit Block Protection status Block Protection status 00 0 0000h Block Unprotected Non-volatile Modify Protection bit can be modified(1) 00 1 Non-volatile Modify Protection bit cannot be modified(1) 01 0 0001h Block Program/Erase Protected Non-volatile Modify Protection bit can be modified(1) 10 0 11 0 01 1 Non-volatile Modify Protection bit cannot be modified(1) 10 1 11 1 1. The Lock bit can always be modified by issuing a Clear Lock bit command or by taking the device through a Power-up or Hardware Reset. |
Similar Part No. - M29DW641F |
|
Similar Description - M29DW641F |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |