The Specialist In Drum Handling Equipment

Heavy-Duty Hydra-Lift Karriers

Copyright 2021 - Morse Mfg. Co., Inc.

Spec Sheet F410

(Updated 23 Dec, 2021)

1

MADE

IN

USA

service@morsedrum.com

103 Kuhn Rd.

Syracuse, NY, 13208 USA

morsedrum.com

(315) 437-8475

> > Click to Watch Video < <

Power Lift and Tilt Models are available with electric,

air or battery power lift and tilt.

Power Lift, Manual Tilt Models

have electric, air or battery

power lift, but a pull chain

and chain wheel for drum tilt

control. Covered tilt gears

with 60:1 reduction make

pouring your drum simple

and easy.

Manual Lift and Tilt

Models have a hydraulic

hand pump with variable

release valve for drum lift,

and pull chain and chain

wheel drum tilt control.

Option X02-410

Factory installed Hand Crank

on 410 Series with manual

tilt control. Replaces pull

chain tilt control.

Option X03-410

Factory installed 16” (40.6

cm) Diameter Hand Wheel

(not shown) on 410 Series

with manual tilt control.

Replaces pull chain tilt control.

MORStop Tilt-Brake

The MORStop

Tilt-Brake is factory

installed on all

manual tilt models to

automatically hold the

drum tilt angle, even if

the drum’s contents shift suddenly.

Lift and Dispense up to a 1200 Lb. (544 kg) Drum

You Control Lifting Height and Pouring Angle

•

Removes Effort and Increases Productivity

•

Models with Power Lift and Tilt

•

Heavy-Duty Hydraulics

•

360

•

0

Tilt Control in Either Direction

Capacity: 1200 Lb. (544 kg) full drum

•

(600 Lb. (272 kg) half-full* drum)

Available with Spark Resistant Parts

•

A fully loaded drum is easily handled by

one person with a Morse Heavy-Duty

Hydra-Lift Karrier. Lift, move and control

pouring of a 55-gallon (208 liter) steel

drum weighing up to 1200 Lb. (544 kg)

with minimal physical effort. Maximum

pouring height is 72” (183 cm). Handle

a variety of other drums by installing the

correct MORCINCHTM options for your

particular size and type of drum.

You raise and control dispensing as

necessary. Increase pouring angle for

full discharge, reduce to control the pour

rate, or reverse to stop pouring and

deliver partial drum contents.

Material is discharged straight forward

directly from the drum. Faucets, pipe,

valve extensions may be attached to

the drum. The ability to control pouring

straight from the drum with variable

lift and pour angles is an important

difference from chute type dumpers.

Though often used for lifting and

pouring, the Hydra-Lift Karrier can be

used in various ways, such as lifting

drums on or off scales, platforms,

conveyors or trucks, moving drums to

or from storage, charging high tanks

and positioning drums of parts for hand

access at work stations.

* Half-full rating is based on tilt mechanism’s capacity for handling a bottom heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than a full drum.

Model 410-110

with 72” (183 cm) dispensing height

and electric power lift and tilt.

Pull chain and chain

wheel manual tilt

Each Heavy-Duty Hydra-Lift Karrier Features

Dual Heavy-duty hydraulic cylinders with a built-in

flow control for a uniform, controlled speed of

descent with even the heaviest drum. Heavy duty

hydraulic lift cylinders include a velocity fuse to

provide a full line shut-off in the event of a line

failure.

Welded rectangular steel tube framework.

Easy maneuverability on four 4” (10.2 cm) nylon

swivel casters under the base.

Step-down floor lock.

Drum Handling System

Automatically adjusts for 22” to 23.5” (56 to 59.7 cm)

•

diameter drum

Accepts Diameter Adaptors for your smaller drum

•

Accepts bolt-on Top Rim Clamp or Bracket

•

Assembly to handle a

plastic or fiber drum

Includes a flexible cover

•

on the cinch chain to help

protect the sidewall of

your drum

Incorporates alloy cinch chain and hinge, and

•

durable stress relief weld joints

Model #

Description

Domestic

Ship Weight

410-110

AC Power Lift and Tilt

560 Lb. (255 kg)

410-114

Air Power Lift and Tilt

550 Lb. (250 kg)

410-115

DC Power Lift and Tilt

600 Lb. (273 kg)

410-120

AC Power Lift, Manual Tilt

536 Lb. (244 kg)

410-124

Air Power Lift, Manual Tilt

515 Lb. (234 kg)

410-125

DC Power Lift, Manual Tilt

569 Lb. (259 kg)

410

Manual Lift and Tilt

499 Lb. (227 kg)

410M-114

Air Power Lift and Tilt with Spark Resistant Parts

550 Lb. (250 kg)

410M-124

Air Power Lift, Manual Tilt with Spark Resistant Parts

515 Lb. (234 kg)

410M

Manual Lift and Tilt with Spark Resistant Parts

499 Lb. (227 kg)