Arduino MKR WAN 1310

3

Board Operation

3.1 Getting Started – IDE

If you want to program your Arduino Nano while offline you need to install the Arduino Desktop IDE [1]

To connect the Arduino Nano IoT to your computer, you’ll need a Mini-B USB cable. This also provides

power to the board, as indicated by the LED.

3.2 Getting Started – Cloud

All Arduino and Genuino boards, including this one, work out-of-the-box on the Arduino Web Editor [2],

by just installing a simple plugin.

The Arduino Web Editor is hosted online, therefore it will always be up-to-date with the latest features

and support for all boards. Follow this simple guide [3] to start coding on the browser and upload your

sketches onto your board.

3.3 Board Recovery

All Arduino boards have a built-in bootloader that allows flashing the board via USB. In case a sketch

locks up the processor and the board is not reachable anymore via USB it is possible to enter bootloader

mode by double-tapping the reset button right after power up.

7

​ / ​15

Arduino MKR WAN 1310 - 12/23/2020