www.ct-micro.com

© 2022 CT MICRO INTERNATIONAL CORPORATION

Rev.1

ALL RIGHTS RESERVED.

Page 6

Aug, 2022

UVK5050O37-G0

3W UV Power LED

Notes:

1. The cathode side of the device is denoted by the chamfer on the part body.

2. Electrical insulation between the case and the board is required. Do not electrically connect

either the anode or cathode to the slug.

3. Drawing not to scale.

4. All dimensions are in millimeters.

5. Unless otherwise indicated, tolerances are ± 0.10mm.

6. Please do not solder the emitter by manual hand soldering, otherwise it will damage the emitter.

7. The UV LED is not protected by a lens and requires careful handling

(1) Do not handle the LED with bare hands as it may contaminate the LED surface and affect the

optical characteristics.

(2) Avoid touching the LED die

*The appearance and specifications of the product may be modified for improvement without notice