 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
TLE9185QXV33 Datasheet(PDF) 26 Page - Infineon Technologies AG |
|
|
|||||||||||||||||||||||||||||
TLE9185QXV33 Datasheet(HTML) 26 Page - Infineon Technologies AG |
|
|
26 / 192 page  TLE9185QXV33 BLDC Driver System Features Datasheet 26 Rev.1.0 2021-01-21 • State transition is only initiated by specific SPI command. Note • An interrupt is triggered on the pin INTN when Stop Mode is entered and not all wake source signalization flags were cleared. • If high-side switches are kept enabled during Stop Mode, then the device current consumption will increase. • It is not possible to switch directly from Stop Mode to Sleep Mode. Doing so will also set the SPI_FAIL flag and will bring the device into Restart Mode. 5.5.4 Normal Mode -> Sleep Mode This transition is intended to reduce as much as possible the current consumption keeping active only wake- up sources. All wake-up sources configurations shall be done in Normal Mode. Prerequisites: • VCC1>Vrtx • Device in Normal Mode • All wake source signalization flags were cleared (including the LSxDSOV_BRK bit) • At least one wake-up source activated Triggering Events: • State transition is only initiated by specific SPI command. Note •If VCC1_UV or VCC1_OV (with Config to go to Restart Mode) occurs at the border of the Sleep Mode entry: The device will go immeditaley into Restart Mode. •If TSD2 or VCC1_OV (with Config to go to Fail-Safe Mode) occurs at the border of the Sleep Mode entry: The device will enter immediately Fail-Safe Mode. • As soon as the Sleep Mode command is sent, the Reset will go low. • It is not possible to switch all wake sources off in Sleep Mode. Doing so will set the SPI_FAIL flag and will bring the device into Restart Mode. 5.5.5 Stop Mode -> Normal Mode This transition is intented to set the device in Normal Mode where all the device integrated features are availbale and configurable. Prerequisites: • VCC1>Vrtx • Device in Stop Mode Triggering Events: • State transition is only initiated by SPI command. Note •None |
Similar Part No. - TLE9185QXV33 |
|
Similar Description - TLE9185QXV33 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
