MODEL: BX-16G

BX-16G SPECIFICATIONS

ES-3832 Rev.2 Page 1/4

http://www.m-system.co.jp/

STANDARD RACK MOUNTING FRAME

Functions & Features

• Standard Rack Mounting Frame for mounting individual

housing-stored Space-saving Rack-mounted Signal

Conditioners (M-RACK, H-RACK, W-RACK, B-RACK, A-RACK)

• Convenient for power supply wiring in instrumentation

panels

• Can be inserted into JIS and EIA standard racks

• Also available with power distributor

• Power distributor has an alarm fuse in each loop

• Capable of alarm contact output for blown fuses

MODEL: BX–16G–[1]

ORDERING INFORMATION

• Code number: BX-16G-[1]

Specify a code from below for [1].

(e.g. BS-16G-B)

[1] Power distributor

1: Without

2: With (single-pole fuse)

B: With (double-pole fuse)

GENERAL SPECIFICATIONS

Construction: Rack-mounted

Capacity:

16 positions (H-RACK, B-RACK)

8 positions (M-RACK, W-RACK, A-RACK)

Terminal screw material:

Nickel-plated iron, torque: 0.8 N·m (with power distributor)

Material: SPCC

Coating: Melamine baked coating

Isolation: Power to alarm (when power distributor is

attached)

Power distributor circuit: with alarm fuse for each single

loop

Alarm: dry contact output at blown fuse

Fuse rating: 0.5 A

INSTALLATION

■ Power distributor

Power input: Operational voltage range 24 V DC ± 10%

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Rack mounting

Weight: Mounting frame approx. 800 g (1.8 lb), mounting

frame + with power distributor approx. 2 kg (4.4 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

1500 V AC @1 minute (power supply or alarm terminal to

ground)

500 V AC @1 minute (power supply to alarm terminal)

(BX-16G-2, B only)