HCF4047B datasheet(8/12 Pages) STMICROELECTRONICS

Part #	HCF4047B

Description	LOW POWER MONOSTABLE/ASTABLE MULTIVIBRATOR

Download	12 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

8 / 12 page

HCF4047B

8/12

Where tM = monostable mode pulse width. Values

for tM are as follows :

Typ : VTR = 0.5 VDD tM = 2.48 RC

Min : VTR = 0.33 VDD tM = 2.71 RC

Max : VTR = 0.67 VDD tM = 2.48 RC

Thus if tM = 2.48 RC is used, the maximum

variation will be (+ 9.3%, - 0.0%).

Note : In the astable mode, the first positive half

cycle has a duration of TM ; succeeding durations

are tA/2.

In addition to variations from unit to unit, the

monostable pulse width may vary as a function of

frequency with respect to VDD and temperature.

4 - RETRIGGER MODE

The HCF4047B can be used in the retrigger mode

to extend the output-pulse duration, or to compare

the frequency of an input signal with that of the

internal oscillator. In the retrigger mode the input

pulse is applied to terminals 8 and 12, and the

output is taken from terminal 10 or 11. As shown in

fig.A normal monostable action is obtained when

one retrigger pulse is applied. Extended pulse

duration is obtained when more than one pulse is

applied. For two input pulses, tRE = t1’ + t1 + 2t2.

For more than two pulses, tRE (Q OUTPUT)

terminates at some variable time tD after the

termination of the last retrigger pulse. tD is variable

because tRE (Q OUTPUT) terminates after the

second positive edge of the oscillator output

appears at flip-flop 4 (see logic diagram).

FIGURE A : Retrigger-mode waveforms

5 - EXTERNAL COUNTER OPTION

Time tM can be extended by any amount with the

use of external counting circuitry. Advantages

include digitally controlled pulse duration, small

timing capacitors for long time periods, and

extremely fast recovery time.

A typical implementation is shown in fig. B. The

pulse duration at the output is

text = (N - 1) (tA) + (tM + tA/2)

Where text = pulse duration of the circuitry, and N

is the number of counts used.

FIGURE B : Implementation of external counter option

Similar Part No. - HCF4047B

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	HCF4047B	302Kb / 15P	LOW-POWELOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR
	HCF4047BC1	302Kb / 15P	LOW-POWELOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR
	HCF4047BEY	302Kb / 15P	LOW-POWELOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR
	HCF4047BM1	302Kb / 15P	LOW-POWELOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR

More results

Similar Description - HCF4047B

Manufacturer	Part #	Datasheet	Description
Fairchild Semiconductor	CD4047BC	94Kb / 9P	Low Power Monostable/Astable Multivibrator
National Semiconductor ...	CD4047BC	138Kb / 6P	Low Power Monostable/Astable Multivibrator
National Semiconductor ...	CD4047BM	138Kb / 6P	Low Power Monostable/Astable Multivibrator
Micro Electronics	MMC4047	240Kb / 6P	LOW POWER MONOSTABLE ASTABLE MULTIVIBRATOR
Fairchild Semiconductor	CD4047BC	85Kb / 9P	Low Power Monostable/Astable Multivibrator
Nexperia B.V. All right...	HEF4047B	276Kb / 22P	Monostable/astable multivibrator Rev. 6 - 17 March 2017
NXP Semiconductors	HEF4047B	279Kb / 15P	Monostable/astable multivibrator January 1995
Texas Instruments	CD4047B	508Kb / 15P	[Old version datasheet] CMOS LOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR
Intersil Corporation	CD4047BMS	127Kb / 15P	CMOS Low-Power Monostable/Astable Multivibrator December 1992
STMicroelectronics	HCC4047B	302Kb / 15P	LOW-POWELOW-POWER MONOSTABLE/ASTABLE MULTIVIBRATOR

More results

HCF4047B Datasheet(PDF) 8 Page - STMicroelectronics

HCF4047B Datasheet(HTML) 8 Page - STMicroelectronics

Similar Part No. - HCF4047B

Similar Description - HCF4047B

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL