Property of Lite-On Only

Part No.: LOPL-E011C DATA SHEET

Page:

3

of

12

BNC-OD-C131/A4

3. Rating and Characteristics

3.1 Absolute Maximum Ratings at Ta=25°C

Parameter

Symbol

Rating

Unit

Power Dissipation

1.5

W

Forward Current

350

mA

Forward Pulse Current

500

mA

Reverse Voltage

5

V

Junction Temperature

125

°C

Thermal Resistance, Junction-Case

15

°C/W

Operating Temperature Range

-40 - 80

°C

Storage Temperature Range

-40 - 120

°C

Soldering Condition

1, 2

260°C For 5 Seconds

Notes

1. Proper current derating must be observed to maintain junction temperature below the maximum.

For more information, consult the LOPL Emitters application notes, available upon request.

2. Measured at leads, during lead soldering and heat pad attach, body temperature must not exceed

120°C. LOPL Emitters can’t be soldered by general IR or Vapor phase reflow, nor by wave

soldering. Lead soldering is limited to selective heating of the leads, such as by hot bar reflow or

hand soldering.