AD9523 datasheet(11/60 Pages) AD

Part #	AD9523

Description	Jitter Cleaner and Clock Generator

Download	60 Pages

Scroll/Zoom	100%

Manufacturer	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

11 / 60 page

Data Sheet

AD9523

Rev. D | Page 11 of 60

ABSOLUTE MAXIMUM RATINGS

Table 17.

Parameter

Rating

VDD3_PLL1, VDD3_PLL2, VDD3_REF,

VDD3_OUT, LDO_VCO to GND

−0.3 V to +3.6 V

REFA, REFA, REFIN, REFB, REFB to GND

−0.3 V to +3.6 V

SCLK/SCL, SDIO/SDA, SDO, CS to GND

−0.3 V to +3.6 V

OUT0, OUT0, OUT1, OUT1, OUT2, OUT2,

OUT3, OUT3, OUT4, OUT4, OUT5,

OUT5, OUT6, OUT6, OUT7, OUT7,

OUT8, OUT8, OUT9, OUT9, OUT10,

OUT10, OUT11, OUT11, OUT12,

OUT12, OUT13, OUT13 to GND

−0.3 V to +3.6 V

SYNC, RESET, PD to GND

−0.3 V to +3.6 V

STATUS0, STATUS1 to GND

−0.3 V to +3.6 V

SP0, SP1, EEPROM_SEL to GND

−0.3 V to +3.6 V

VDD1.8_OUT, LDO_PLL1, LDO_PLL2 to

GND

2 V

Operating Temperature Range

−40°C to +85°C

Junction Temperature

115°C

Storage Temperature Range

−65°C to +150°C

Lead Temperature (10 sec)

300°C

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 18. Thermal Resistance

Package

Type

Airflow

Velocity

(m/sec)

θJA1, 2

θJC1, 3

θJB1, 4

ΨJT1,2

Unit

72-Lead LFCSP,

10 mm ×

10 mm

0

21.3

1.7

12.6

0.1

°C/W

1.0

20.1

0.2

°C/W

2.5

18.1

0.3

°C/W

1 Per JEDEC 51-7, plus JEDEC 51-5 2S2P test board.

2 Per JEDEC JESD51-2 (still air) or JEDEC JESD51-6 (moving air).

3 Per MIL-Std 883, Method 1012.1.

4 Per JEDEC JESD51-8 (still air).

For information about power dissipation, refer to the Power

Dissipation and Thermal Considerations section.

ESD CAUTION

Similar Part No. - AD9523

Manufacturer	Part #	Datasheet	Description
Analog Devices	AD9523	879Kb / 60P	Jitter Cleaner and Clock Generator with 14 Differential or 29 LVCMOS Outputs REV. C
	AD9523-1	1Mb / 63P	Low Jitter Clock Generator
	AD9523-1/PCBZ	840Kb / 60P	Low Jitter Clock Generator REV. B
	AD9523-1BCPZ	840Kb / 60P	Low Jitter Clock Generator REV. B
	AD9523-1BCPZ	1Mb / 63P	Low Jitter Clock Generator

More results

Similar Description - AD9523

Manufacturer	Part #	Datasheet	Description
Analog Devices	AD9524	973Kb / 56P	Jitter Cleaner and Clock Generator
Texas Instruments	CDCM6208V1F	2Mb / 87P	[Old version datasheet] 2:8 Clock Generator, Jitter Cleaner with Fractional Dividers
	LMK04100	1Mb / 52P	[Old version datasheet] Family Clock Jitter Cleaner
	CDCM6208	2Mb / 89P	[Old version datasheet] 2:8 Clock Generator, Jitter Cleaner With Fractional Dividers
	CDCM6208	2Mb / 92P	[Old version datasheet] 2:8 Clock Generator, Jitter Cleaner With Fractional Dividers
Analog Devices	AD9524BCPZ	925Kb / 56P	Jitter Cleaner and Clock Generator with 6 Differential or 13 LVCMOS Outputs Rev. E
Analog Devices	AD9524	863Kb / 56P	Jitter Cleaner and Clock Generator with 6 Differential or 13 LVCMOS Outputs REV. D
Texas Instruments	CDCM6208	2Mb / 78P	[Old version datasheet] 2:8 CLOCK GENERATOR, JITTER CLEANER WITH FRACTIONAL DIVIDERS
	LMK04803	2Mb / 139P	[Old version datasheet] Low-Noise Clock Jitter Cleaner
	CDCM6208V2G	2Mb / 88P	[Old version datasheet] CDCM6208V2G 2:8 Clock Generator, Jitter Cleaner with Fractional Dividers

More results

AD9523 Datasheet(PDF) 11 Page - Analog Devices

AD9523 Datasheet(HTML) 11 Page - Analog Devices

Similar Part No. - AD9523

Similar Description - AD9523

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Datasheet Download

Link URL