LTC6752 datasheet(15/30 Pages) AD

Part #	LTC6752

Description	Comparator Family with Rail-to-Rail Inputs

Download	30 Pages

Scroll/Zoom	100%

Manufacturer	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

15 / 30 page

LTC6752/LTC6752-1/

LTC6752-2/LTC6752-3/

LTC6752-4

15

6752fc

For more information www.linear.com/LTC6752

pin FuncTions

+IN: Positive Input of the Comparator. The voltage range

of this pin can go from VEE to VCC.

–IN: Negative Input of the Comparator. The voltage range

of this pin can go from VEE to VCC.

VCC:PositiveSupplyVoltagefortheLTC6752/LTC6752-1,

Positive Supply Voltage for the Input Stage of the

LTC6752-2/LTC6752-3/LTC6752-4.

VDD: Positive Supply Voltage for the Output Stage of the

LTC6752-2/LTC6752-3/LTC6752-4. Typically the voltage

is from 1.71V to 3.5V. See the section High Speed Board

Design Techniques for proper power supply layout and

bypassing.

VEE: Negative power supply, normally tied to ground. This

can be tied to a voltage other than ground as long as the

constraints for total supply voltage relative to VCC (and

VDD for separate supply operation) are maintained.

SHDN: Active low comparator shutdown, threshold is

0.6V above VEE. The comparator is enabled when this pin

is left unconnected.

LE/HYST: This pin allows the user to adjust the compara-

tor’s hysteresis as well as latch the output state if the pin

voltage is taken within 300mV above VEE. Hysteresis can

be increased or disabled by voltage, current or a resistor

to VEE. Leaving the pin unconnected results in a typical

hysteresis of 5mV.

Q: Comparator Output. Q is driven high when +IN > –IN

and driven low when +IN < –IN.

Q: Comparator Complementary Output (Available on

LTC6752-3 Only). Logical inversion of Q.

Similar Part No. - LTC6752

Manufacturer	Part #	Datasheet	Description
Linear Technology	LTC6752	700Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
Analog Devices	LTC6752	3Mb / 34P	Four-Channel Transimpedance Amplifier with Output Multiplexing Rev. 0
Linear Technology	LTC6752-1	700Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
	LTC6752-1	547Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
	LTC6752-2	700Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs

More results

Similar Description - LTC6752

Manufacturer	Part #	Datasheet	Description
Micrel Semiconductor	MIC7211	366Kb / 7P	IttyBitty Rail-to-Rail Input Comparator
Linear Dimensions Semic...	LND5432HT	124Kb / 1P	Temperature-Insensitive Comparator with Rail-to-Rail
Linear Technology	LTC6752	547Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
	LTC6752-1	547Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
	LTC6752-2	547Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
	LTC6752-3	547Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
	LTC6752-4	547Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
Texas Instruments	LMV7219	1Mb / 25P	Comparator with Rail-to-Rail Output
Texas Instruments	TLV3502-Q1	1,007Kb / 23P	Rail-to-Rail High-Speed Comparator
Linear Technology	LTC6752	700Kb / 30P	280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs

More results

LTC6752 Datasheet(PDF) 15 Page - Analog Devices

LTC6752 Datasheet(HTML) 15 Page - Analog Devices

Similar Part No. - LTC6752

Similar Description - LTC6752

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Datasheet Download

Link URL