Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

Page 1 of 3

The Big Deal

• High rejection (70 dB typical)

• Linear phase (± 9deg typical over Fc ± 30 MHz)

• Miniature shielded case

Product Overview

The BPF-C495+ is a narrow band pass filter in a metal shielded package (size of 0.87" x 0.80" x .25") fabricated using

SMT technology. The BPF-C495+ offers a typical pass band insertion loss of 1.7 dB with sharp roll-off and stopband

rejection down to 90 dB typ. In addition, it has repeatable performance across production lots and consistent perfor-

mance across temperature.

Key Features

BPF-C495+

50Ω

470 to 520 MHz

CASE STYLE: HU1186

Bandpass Filter

Surface Mount

Feature

Advantages

Minimal Phase deviation over attenu-

ation range: ± 9 deg typical over Fc

±30MHz.

Can provide low signal distortion for high data rate communication systems.

High rejection, 70dB typical

Achieving 90dB rejection at 1200MHz; the BPF-C495+ provides a versatile anti aliasing solution for

high data rate receivers.

Good VSWR, 1.3:1 typical over

passband

The BPF-C495+ has very good return loss over the operating bandwidth which enables low ripple

interface when cascaded with other devices.

Sharp roll off

Provides good rejection of signals close to the passband, for improved system

performance.

Metal SMT shielded case

Reduced interference to, and from surrounding components.