The XMC1400 devices are members of the XMC™1000 Family of microcontrollers based
on the ARM Cortex-M0 processor core. The XMC1400 series addresses the real-time
control needs of motor control and digital power conversion. It also features peripherals
for LED Lighting applications and Human-Machine Interface (HMI).
Features
CPU subsystem
• 32-bit ARM Cortex-M0 CPU Core
– 0.84 DMIPS/MHz (Dhrystone 2.1) at
48 MHz
• Nested Vectored Interrupt Controller
• 64 interrupt nodes
• MATH coprocessor
– 24-bit trigonometric calculation
(CORDIC)
– 32-bit divide operation
• 2x4 channels ERU for event
interconnections
On-Chip Memories
• 8 Kbyte ROM
• 16 Kbyte SRAM (with parity)
• up to 200 Kbyte Flash (with ECC)
Supply, Reset and Clock
• 1.8 V to 5.5 V supply with power on reset
and brownout detector
• On-chip clock monitor
• External crystal oscillator support (32 kHz
and 4 to 20 MHz)
• Internal slow and fast oscillators without
the need of PLL
System Control
• Window watchdog
• Real time clock module
• Pseudo random number generator
Communication Peripherals
• Four USIC channels, usable as
– UART (up to 12 Mb/s)
– single-SPI (up to 12 Mb/s)
– double-SPI (up to 2 × 12 Mb/s)
– quad-SPI (up to 4 × 12 Mb/s)
– IIC (up to 400 kb/s)
– IIS (up to 12 Mb/s)
– LIN interfaces (20kb/s)
• LEDTS in Human-Machine interface
– up to 24 touch pads
– drive up to 144 LEDs
• MultiCAN+, Full-CAN/Basic-CAN with 2
nodes, 32 message objects (up to
1 MBaud)
Analog Frontend Peripherals
• A/D Converters (up to 12 analog inputs)
– 2 sample and hold stages
– fast 12-bit ADC (up to 1.1 MS/s),
adjustable gain
– 0 V to 5.5 V input range
• Up to 8 channels out of range
comparators
• Up to 4 fast analog comparators
• Temperature Sensor
Industrial Control Peripherals
• 2x4 16-bit 96 MHz CCU4 timers for signal
monitoring and PWM
• 2x4 16-bit 96 MHz CCU8 timers for
complex PWM, complementary high/low
side switches and multi phase control
• 2x POSIF for hall and quadrature
encoders, motor positioning
• 9 channel BCCU (brightness and color
control) for LED lighting applications
Up to 56 Input/Output Ports
• 1.8 V to 5.5 V capable
• up to 8 high current pads (50 mA sink)
On-Chip Debug Support
• 4 breakpoints, 2 watchpoints
• ARM serial wire debug, single-pin debug
interfaces
Programming Support
• Single-pin bootloader
• Secure bootstrap loader SBSL (optional)
Packages
• TSSOP-38 (9.7 × 6.4 mm2)
• VQFN-40/48/64 (5×5/7×7/8×8 mm2)
• LQFP-64 (12 × 12 mm2)
Tools
• Free DAVE™ toolchain with low
level drivers and apps