[TMI]

Functional Description
The TC9021/TC9020 is part of a new generation of high performance, host-optimized network interface cards designed for mission critical systems such as servers and high-end workstations. Offering two gigabits per second of aggregate bandwidth, the TC9021/TC9020 optimizes performance while minimizing network overhead on the host system. Compared to leading Fast Ethernet solutions, the TC9021/TC9020 transfers data at less than one tenth of the host CPU utilization rate.

Features
❑ IEEE 802.3z compliant MAC supporting full wire speed at 1Gbps
❑ 1000Mbps, 100Mbps, and 10Mbps triple speed support
❑ GMII, MII or TBI interface with integrated 1000BASE-X PCS with Auto-Negotiation
❑ Half duplex carrier extension and packet bursting
❑ Scatter/gather DMA capable of 1Gbps transaction
❑ 32/64-bit PCI bus support--- TC9021 32-bit PCI bus support --- TC9020
❑ TCP/UDP/IP checksum offloading
❑ Minimize interrupts
❑ Supports “interrupt-less” transmit operation
❑ Support for IEEE 802.1p prioritizing via priority queuing and interrupts
❑ Extensive IEEE 802.1Q VLAN support
❑ Jumbo frame support
❑ Provides a variety of flexible receive filtering modes, including VLAN, IP multicast, and hash table
❑ Flash ROM interface for remote network boot
❑ ACPI and wake On LAN support
❑ Windows NT 4.0, Windows 9x, Windows 2000, Novell Netware 4.x/5.x, Linux 2.x
❑ Low power 2.5/3.3V CMOS design with 5V tolerant I/O
❑ 0.25um CMOS technology
❑ 208-pin PQFP