DESCRIPTION
The FLASH+PSD family of memory systems for microcontrollers (MCUs) brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. FLASH+PSD devices combine many of the peripheral functions found in MCU based applications. FLASH+PSD provides a glueless interface to most commonly-used ROMless MCUs.

■ Single Supply Voltage:
    – 5 V±10% for M88xxFxY
    – 3 V (+20/–10%) for M88xxFxW
■ 1 or 2 Mbit of Primary Flash Memory (8 uniform sectors, 16K x 8, or 32K x 8)
■ A second non-volatile memory:
    – 256 Kbit (32K x 8) EEPROM (for M8813F1x) or Flash memory (for M88x3F2x)
    – 4 uniform sectors (8K x 8)
■ SRAM (16 Kbit, 2K x 8; or 64 Kbit, 8K x 8)
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 27 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ Stand-by current:
    – 50 µA for M88xxFxY
    – 25 µA for M88xxFxW
■ High Endurance:
    – 100,000 Erase/Write Cycles of Flash Memory
    – 10,000 Erase/Write Cycles of EEPROM
    – 1,000 Erase/Write Cycles of PLD