General Description The DS8007 multiprotocol dual smart card interface is a low-cost, dual smart card reader interface supporting all ISO 7816, EMV™, and GSM11-11 requirements. Through its 8-bit parallel bus and dedicated address selects (AD3–AD0), the DS8007 can easily and directly connect to the nonmultiplexed byte-wide bus of a Maxim/Dallas secure microcontroller. Optionally, the parallel bus can be multiplexed to allow direct access to the multiplexed bus of an 80C51-compatible microcontroller through MOVX memory addressing. Features ♦ Complete Interface/Control for Two Separate Smart Card Devices ♦ 8kV (min) ESD Protection on Card Interfaces ♦ Internal IC Card Supply Voltage Generation 5.0V ±5%, 65mA (max) 3.0V ±8%, 50mA (max) 1.8V ±10%, 30mA (max) ♦ Automatic Card Activation, Deactivation, and Data Communication Controlled by Dedicated Internal Sequencer ♦ Host Interface Through an 8-Bit Parallel Bus (UserSelectable Multiplexed or Nonmultiplexed Modes) ♦ Chip Select and Tri-State Bus Allow Multiple Devices (Card Readers and Memories) on Bus ♦ 8-Character Receive FIFO with Optional Programmable Depth/Threshold ♦ I/O Interface Pin to External ISO 7816 UART ♦ Separate Card Clock Generation (Up to 10MHz) with 2x Frequency Doubling ♦ Selectable Card Clock STOP HIGH, STOP LOW, or Internally Generated 1.25MHz (for Card PowerDown) ♦ EMV-Certified Reference Design and Evaluation Kit Available (DS8007-KIT) Applications Banking Applications (Point-of-Sale Terminals, Debit/Credit Payment Terminals, PIN Pads, Automated Teller Machines) Telecommunications Pay Television Access Control
|