Description The MLSC series was designed for applications directly linked to a power source / voltage source (e.g. battery, clamp 30 in automotive applications) and safety relevant application without (integrated) current limitation. Features ▪ The MLSC (Multi Layer Serial Ceramic Capacitor) consists of two serial connected capacitors in one component ▪ Due to the special design the probability of a short circuit is much reduced - in case of a bending crack - in many cases of an assembling crack - in many cases of a solder shock crack ▪ The MLSC meets the requirements of automotive manufacturers for a (redundant) serial connection of two capacitors, if the application is directly connected to the battery, in one component. ▪ Reduced number of components leads to - increased reliability - place saving on the PCB - reduced assembling time ▪ The MLSC is based on established MLCC technology, but with more robust design. This MLCC technology offers highest reliability (ppb-rate) and long term field experience. ▪ The MLSC offers high reliability due to more stringent process control and end of line testing, which enables the achievement of a 10 ppb level for the application failure rate (measure: 0 mileage and field), see chapter ppb – Level Assurance System page 12. ▪ The MLSC meets AEC-Q200 requirements, see pages 7 – 11. ▪ The specified bending strength is 2 mm according to piezo electric method (∆I measurement) ▪ The MLSC is suitable for applications with temperature requirements up to 150 °C with respect to the voltage derating and short term temperature peaks up to 175 °C without load, see chapter High Temperature Application page 3. ▪ The MLSC is lead free in terms of RoHS. ▪ Nickel barrier termination ▪ BME technology ▪ The MLSC offers a selected range of capacitance in case size 0805 (rated voltage 50 V and 100 V). Applications Applications directly linked to a power source / voltage source and safety relevant application without (integrated) current limitation. Some examples: ▪ Automotive electronics (e.g. clamp 30, RF filter in small power motors, security control systems or drive and engine control units) ▪ Power electronics (e.g. DC/DC converter) ▪ Mobile devices with battery / accumulator (e.g. filter at charging set)
|