NFAM3512L7B is an advanced IPM module providing
a fully−featured, high−performance inverter output stage for AC
Induction, BLDC and PMSM motors. These modules integrate
optimized gate drive of the built−in IGBTs to minimize EMI and
losses, while also providing multiple on−module protection features
including under−voltage lockouts, over−current shutdown, thermal
monitoring of drive IC, and fault reporting. The built−in, high−speed
HVIC requires only a single supply voltage and translates the
incoming logic−level gate inputs to the high−voltage, high−current
drive signals required to properly drive the module’s internal IGBTs.
Separate negative IGBT terminals are available for each phase to
support the widest variety of control algorithms.

Features
• 1200 V 35 A 3−Phase FS7 IGBT Inverter, Including Control ICs for
Gate Drive and Protections
• Very Low Thermal Resistance Using Al2O3 DBC Substrate
• Active Logic Interface
• Built−in Under−voltage Protection (UVP)
• Built−In Bootstrap Diodes/Resistors
• Separate Low−side IGBT Emitter Connections for Individual Current
Sensing of Each Phase
• Temperature Sensor (TSU Output by LVIC)
• UL Certification: E209204
• This is a Pb−Free Device

Typical Application
• Industrial Drives
• Industrial Pumps
• Industrial Fans
• Industrial Automation