Description
FNB34060T6 is an advanced Motion SPM 3 module providing a
fully−featured, high−performance inverter output stage for AC
Induction, BLDC, and PMSM motors. These modules integrate
optimized gate drive of the built−in IGBTs to minimize EMI and
losses, while also providing multiple on−module protection features
including under−voltage lockouts, over−current shutdown, thermal
monitoring of drive IC, and fault reporting. The built−in, high−speed
HVIC requires only a single supply voltage and translates the
incoming logic−level gate inputs to the high−voltage, high−current
drive signals required to properly drive the module’s internal IGBTs.
Separate negative IGBT terminals are available for each phase to
support the widest variety of control algorithms.

Features
• 600 V − 40 A 3−Phase IGBT Inverter with Integral Gate Drivers and
Protection
• Low−Loss, Short−Circuit Rated IGBTs
• Very Low Thermal Resistance using Al2O3 DBC Substrate
• Built−In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB
Layout
• Separate Open−Emitter Pins from Low−Side IGBTs for Three−Phase
Current Sensing
• Single−Grounded Power Supply
• LVIC Temperature−Sensing Built−In for Temperature Monitoring
• Isolation Rating: 2500 Vrms / 1 min.
• This Device is Pb−Free and is RoHS Compliant

Applications
• Motion Control − Home Appliance / Industrial Motor