Features

ESD Protect for 2 high-speed I/O channels

Provide ESD protection for each channel to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O,
40A for Power
IEC 61000-4-5 (Lightning) 6A (8/20μs)

5V operating voltage

Low capacitance : 1.2pF typical

Fast turn-on and Low clamping voltage

Array of surge rated diodes with internal
equivalent TVS diode

Small package saves board space

Solid-state silicon-avalanche and active circuit
triggering technology

Green part available
Applications

USB2.0 Power and Data lines protection

Notebook and PC Computers

Monitors and Flat Panel Displays

IEEE 1394 Firewire Ports

Video Graphics Cards

SIM ports
Description
AZC002-02N is a high performance and low cost
design which includes surge rated diode arrays
to protect high speed data interfaces. The
AZC002-02N family has been specifically
designed to protect sensitive components, which
are connected to data and transmission lines,
from over-voltage caused by Electrostatic
Discharging (ESD), Electrical Fast Transients
(EFT), and Lightning.
AZC002-02N is a unique design which includes
surge rated, low capacitance steering diodes and
a unique design of clamping cell which is an
equivalent TVS diode in a single package. During
transient conditions, the steering diodes direct
the transient to either the power supply line or to
the ground line. The internal unique design of
clamping cell prevents over-voltage on the power
line, protecting any downstream components.
AZC002-02N may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(± 15kV air, ±8kV contact discharge).