Features

ESD Protect for 4 Lines with Bi-directional

Provide ESD protection for the protected line to
IEC 61000-4-2 (ESD) ±17kV (air), ±12kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Cable Discharge Event (CDE)

Small SOT563 package saves board space

Protect four I/O lines or four power lines

Fast turn-on and Low clamping voltage

Low operating voltage: 5V and below

Solid-state silicon-avalanche and active circuit
triggering technology

Green part available
Applications

Audio Interfaces Protection

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Latchup Protection
Description
AZ2025-04R is a design which includes four
bi-directional ESD rated clamping cells to protect
four power lines, or four control lines, or four low
speed data lines in an electronic systems. The
AZ2025-04R has been specifically designed to
protect sensitive components which are
connected to power and control lines from
over-voltage damage and latch-up caused by
Electrostatic Discharging (ESD), Electrical Fast
Transients (EFT), and Cable Discharge Event
(CDE).
AZ2025-04R is a unique design which includes
proprietary clamping cells in a single package.
During transient conditions, the proprietary
clamping cells prevent over-voltage on the power
lines or control/data lines, protecting any
downstream components.
AZ2025-04R is bi-directional and may be used
on lines where the signal swings above and
below ground.
AZ2025-04R may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).