Features

ESD Protect for 2 Lines with Unidirectional

ESD Protect for 1 Line with Bidirectional

Provide ESD protection for each line to
IEC 61000-4-2 (ESD) ±30kV (air), ±22kV (contact)
IEC 61000-4-4 (EFT) 80A (5/50ns)
IEC 61000-4-5 (Lightning) 16A(8/20μs)

For low operating voltage applications: 5V,
4.2V, 3.3V, 2.5V

Fast turn-on and Low clamping voltage

Array of surge rated equivalent TVS diodes

Small package saves board space

Solid-state silicon-avalanche and active circuit
triggering technology
Applications

Notebooks, Desktops, Servers

Hand Held Portable Applications

Serial and Parallel Ports

Power Lines and Low Speed Data Lines of
Electronic Systems.
Description
AZ2015-02S is a design which includes surge
rated clamping cell arrays to protect the power
lines or control lines in an electronic systems.
The AZ2015-02S has been specifically designed
to protect sensitive components which are
connected to power and control lines from
over-voltage caused by Electrostatic Discharging
(ESD), Electrical Fast Transients (EFT), and
Lightning.
AZ2015-02S is a unique design which includes
proprietary clamping cells in a single package.
During transient conditions, the proprietary
clamping cells prevent over-voltage on the power
lines or control lines, protecting any downstream
components.
AZ2015-02S may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).