1. Product Overview:

· Product: Hi-Rel Surface Mount Chip Inductors
· Series: S0603
· Document Revision: 3/2012

2. Physical Dimensions (not explicitly stated, but inferred from "S0603" naming convention, standard for surface mount chip inductors):
· Size: 0.060" x 0.030" (typical S0603 size)

3. Specifications:

· Operating Temperature Range: -55°C to +125°C
· Current Rating at 90°C Ambient: +35°C Rise
· Insulation Resistance: 1000 Mohm Min.
· Dielectric Withstanding Voltage (DWV): 200 Vrms
· Core Material / Termination: Al2O3 / Sintered MoMn / Electroplated Ni / Electroplated Au Finish (RoHS)
· Termination Options:
* Au Finish (RoHS)
* SnPb Solder
* Pb Free Solder (RoHS)

4. Inductance Values and Characteristics (Table Data - Organized):

Series Code	Inductance (µH)	Turns / Inductance	Maximum Rated Current (A)	Self-Resonant Frequency (MHz)
-3N3J	3.3	18	250	700
-5N6J	5.6	18	250	700
-8N2J	8.2	24	250	700
-10NJ	10.0	28	250	700
-15NJ	15.0	32	250	700
-22NJ	22.0	35	250	700
-33NJ	33.0	37	250	700
-39NJ	39.0	37	250	700
-47NJ	47.0	35	200	700
-56NJ	56.0	35	200	700
-68NJ	68.0	34	200	700
-82NJ	82.0	34	200	700
-101NJ	100.0	31	150	700
-151NJ	150.0	29	100	700
-221NJ	220.0	22	100	700
-271NJ	270.0	22	700

5. Ordering Information:

· Ordering Code Format: S0603 [Inductance Value] [Inductance Tolerance] [Termination Finish] [Test Plan Screening]

· Example: S0603 101N J 1 C

* S0603: Series
* 101N: Inductance Value (101µH)
* J: Inductance Tolerance (Specific Value - Look up table needed for full list)
* 1: Termination Finish (Specific Value - Look up table needed for full list)
* C: Test Plan Screening (Specific Plan – Look up table needed for full list)

6. Test Plan Advantages:

· Multiple screening alternatives
· Eliminates necessity for SCD’s
· Provides quicker delivery
· Reduces overall costs

7. S0603 Test Plan Options:

*(Not explicitly listed in the document, but references the existence of a test plan selection)*
*(The phrase "Destructive Test Units Required" indicates a destructive testing aspect to some test plans)*

Important Notes:

· Lookup Tables Needed: The codes for Inductance Tolerance (J), Termination Finish (1), and Test Plan Screening (C) require reference to lookup tables that are not included in the provided excerpt.
· "Turns" column: indicates the number of turns for the inductor.