ATS-01A-03-C1-R0 / Advanced Thermal Solutions, Inc.

ATS-01A-03-C1-R0 Datasheet with Chat AI

Hello, Please ask a question about ATS-01A-03-C1-R0 Datasheet

# Example questions: ➢ List the components included in the complete thermal solution for the ats heatsink (excluding the heatsink itself).
➢ What is the thermal resistance (in °c/w) of the heatsink with a fin pitch of 5 mm at an airflow of 200 lfm?
➢ What certifications does ats hold regarding environmental compliance?

Part No.	ATS-01A-03-C1-R0
Manufacturer	ATS2
Size	161 Kbytes
Pages	1 page
Description	pushPIN™ HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM

Datasheet Summary with AI

1. Product Description:

· The document describes a heat sink (part number likely ATS-XXXX, implied).
· It's designed for thermal management, likely for electronics.
· It utilizes a "fin" design.

2. Part Information:

· Part Number: ATS-XXXX (the full part number is not fully specified, but the "ATS" prefix is consistent)
· Dimensions:
* Dimension A (Length): 40 mm
* Dimension B (Width): 40 mm
* Dimension C (Height): 35 mm
· Materials: (Not explicitly stated, but likely aluminum or copper alloys – common for heat sinks).

3. Performance Data (Thermal Resistance):

· Airflow Dependent: Thermal resistance values vary significantly based on airflow.
· Air Velocity: Values provided for airflow rates of:
* 0.5 m/s (low airflow)
* 1.0 m/s (moderate airflow)
* 2.0 m/s (high airflow)
· Thermal Resistance Values: The specific resistance values for each airflow rate are present within the table and require detailed extraction.
· Note: These values are for reference only; ATS reserves the right to make changes.

4. Company Information:

· Company Name: Advanced Thermal Solutions, Inc. (ATS)
· Address: 89-27 Access Road, Norwood, MA 02062 USA
· Contact Information:
* Phone: 781.769.2800
* Fax: 781.769.9979
* Website: www.qats.com

Important Notes:

· Full Part Number Needed: To fully identify the heat sink, the complete part number (beyond the "ATS" prefix) is crucial.
· Table Extraction: The numerical thermal resistance values are presented in a table within the document, which would require separate extraction.
· Revision: Document revision "R2-0917" (September 2017) indicates the document's version.