1. Product Identification & Description

· Product Type: Heat Sink (specifically, a heat sink assembly)
· Manufacturer: Advanced Thermal Solutions, Inc. (ATS)
· Part Number/Designation: ATS Part Number is not explicitly listed in the data.
· General Description: A heat sink designed for thermal management of electronic components.

2. Technical Specifications & Performance

· Airflow: The text refers to "air flow" and "thermal performance," but specific airflow rates (CFM) or cooling capacity (BTU/hr) are *not* provided.
· Thermal Resistance: The text refers to "thermal performance," but the actual thermal resistance is not given.
· Performance Data: A table is provided showing the thermal performance (likely resistance) for various airflow rates:
* Airflow Rates (approximate): 100, 200, 500, 1000, 3000, 4000 LPM (liters per minute)
* Corresponding Resistance: Approximately 0.44, 0.39, 0.33, 0.30, 0.28, and 0.27°C·W respectively.
· Materials: The material composition of the heat sink is not explicitly stated.
· Dimensions: Overall dimensions (length, width, height) are *not* provided.
· Fin Design: The text doesn’t describe the fin design or configuration.

3. Features & Compliance

· RoHS Compliant: The heat sink assembly is certified as RoHS compliant (Restriction of Hazardous Substances).
· REACH Compliant: The heat sink assembly is certified as REACH compliant.

4. Contact Information & Location

· Manufacturer Address: 89-27 Access Road, Norwood, MA 02062 USA
· Phone: 781.769.2800
· Fax: 781.769.9979
· Website: [www.qats.com](http://www.qats.com)

5. Important Notes/Disclaimers

· Advanced Thermal Solutions, Inc. (ATS) reserves the right to update or change product specifications without notice.
· For more detailed technical information, contact Advanced Thermal Solutions, Inc. directly.